Concrete Patio Installation in Dallas
Patios built for Texas weather — proper drainage, expansion joints, and finishes that don't flake or fade. Broom finish, stamped, stained, or exposed aggregate.
How We Build a Patio in Dallas
A patio pour starts with layout and grading. We establish the footprint, set the elevation to ensure water drains away from your foundation, and compact the subgrade. In Dallas, that drainage slope matters. Get it wrong and you send water toward your house instead of away from it.
We form the perimeter with steel stakes and lumber, set rebar or welded wire mesh depending on the load requirements, and pour 3,000 to 4,000 PSI concrete at 4 inches thick. Expansion joints go in where the patio meets the house or any other fixed structure. Control joints get cut in a grid pattern to control cracking.
For finish options, broom finish gives you traction and cleans up easy. Stamped concrete gives you the look of stone, brick, or slate at a fraction of the cost. Stained concrete adds color to a smooth trowel finish. Exposed aggregate shows the stone in the mix for a textured, natural look.
Patio Design and Sizing
Most backyard patios in Dallas run between 200 and 600 square feet. That's enough room for a dining table, a grill area, and some lounge space. We pour custom shapes — rectangles, curves, multi-level step-downs — whatever fits your yard and your plan.
If you're building a covered patio, we coordinate with your framing contractor on post footings and anchor bolt placement. The concrete goes in before the cover structure goes up. We set the footings and the slab in the same pour when the layout allows it.
We also pour patios that connect to pools, outdoor kitchens, and fire pit areas. The key is getting the elevations right so water flows where it should and doesn't pond in the middle of your outdoor living space.
Patio Finishes That Work in Dallas
Broom finish is the most popular choice for Dallas patios. It's affordable, slip-resistant when wet, and easy to pressure wash. A standard broom-finish patio runs $6 to $10 per square foot.
Stamped concrete is the next step up. We stamp patterns like ashlar slate, cobblestone, or flagstone into the wet concrete, then apply color hardener and release agent. A stamped patio runs $10 to $18 per square foot depending on the pattern and color scheme.
Stained concrete works well on covered patios where weather exposure is limited. Exposed aggregate holds up great outdoors and gives a natural stone look. We can walk you through samples during your estimate.
Sealing and Maintenance
We recommend sealing stamped and stained patios every 2 to 3 years to protect the color and finish. Broom-finish patios don't require sealing but benefit from it in high-traffic areas.
Maintenance is simple. Pressure wash once or twice a year. Treat oil or grease stains with a degreaser. Keep tree debris off the surface to prevent staining. A well-maintained concrete patio lasts 20 to 25 years in Dallas.
Frequently Asked Questions
How much does a concrete patio cost in Dallas?
Broom-finish patios run $6 to $10 per square foot. Stamped patios run $10 to $18. Final cost depends on size, finish, and site prep requirements.
What's the best patio finish for Dallas weather?
Broom finish handles Dallas heat and rain the best. It's slip-resistant and low-maintenance. Stamped concrete works great too when sealed properly every 2 to 3 years.
How big should my patio be?
A dining area needs about 12x12 feet minimum. A full outdoor living space runs 16x20 or larger. We help you size the patio to fit your yard and how you plan to use the space.
Is stamped concrete worth the extra cost?
Yes, if you want the look of natural stone without the price tag. Stamped concrete costs 40 to 60 percent less than real flagstone or pavers and requires less maintenance over time.
Related Services
Ready to pour?
Get a free, no-obligation quote from a Dallas concrete company that answers the phone, shows up on time, and does the work right.